Kaynak: www.cisco.com

 

Factory Reset

 

When you perform a factory reset of the Cisco Unified IP Phone, the following information is erased or reset to its default value:

CTL file: Erased

LSC: Erased

User configuration settings: Reset to default values

Network configuration settings: Reset to default values

Call histories: Erased

Locale information: Reset to default values

Phone application: Erased (phone recovers by loading the appropriate default load file, which depends on the phone model term75.default.loads, term71.default.loads, term70.default.loads, term65.default.loads, or term45.default.loads)

 

Before you perform a factory reset, ensure that the following conditions are met:

The phone must be on a DHCP-enabled network.

A valid TFTP server must be set in DHCP option 150 or option 66 on the DHCP server.

The default load file for your phone model and the files specified in that file should be available on the TFTP server that is specified by the DHCP packet.

 

To perform a factory reset of a phone, follow these steps:

Procedure

Step 1   Unplug the power cable from the phone and then plug it back in.

The phone begins the power-up cycle.

Step 2   While the phone is powering up, and before the Speaker button flashes on and off, press and hold #.

Continue to hold # until each line button flashes on and off in sequence in orange (for the Cisco Unified IP Phone 7975G, 7971G-GE and 7970G) or amber (for the Cisco Unified IP Phone 7965G and 7945G).

Step 3   Release # and press 123456789*0#.

You can press a key twice in a row, but if you press the keys out of sequence, the factory reset does not take place.

After you press these keys, the line buttons on the phone flash orange and then green (for the Cisco Unified IP Phone 7975G, 7971G-GE and 7970G) or red (for the Cisco Unified IP Phone 7965G and 7945G), and the phone goes through the factory reset process. This process can take several minutes.

Do not power down the phone until it completes the factory reset process, and the main screen displays.