Kaynak: www.motorolasolutions.com
The WS5100 has two vertically-stacked LEDs on its front panel. The LEDs display three colors (blue, amber, and red), and three lit states (solid, blinking, and off). The following tables decode the combinations of LED colors and states.
Start Up
| Event | Top LED | Bottom LED |
| Power Off | Off | Off |
| Power On Self Test (POST) running | All colors in rotation | All colors in rotation |
| POST succeeded | Blue solid | Blue solid |
Primary
| Event | Top LED | Bottom LED |
| Active (Continually Adopting Access Ports) | Blue blinking | Blue solid |
| No License to Adopt | Amber blinking | Amber blinking |
Standby
| Event | Top LED | Bottom LED |
| Active (Failed Over and Adopting Ports) | Blue blinking | Blue blinking |
| Active (Not Failed Over) | Blue blinking | Amber solid |
Error Codes
| Event | Top LED | Bottom LED |
| POST failed (critical error) | Red blinking | Red blinking |
| Software initialization failed | Amber solid | |
|
Country code not configured. Note: During the first setup, the LEDs will remain in this state until the country code is configured. |
Amber solid | Amber blinking |
| No access ports have been adopted | Blue blinking | Amber blinking |